材料科学
法拉第效率
相间
阳极
电解质
硅
钝化
锂(药物)
化学工程
电极
储能
过电位
电化学
纳米技术
聚合
电流密度
作者
Yaru Li,Shengjie Xia,Haosheng Li,Yong Qian,Shiqi Zhao,Xicheng Gao,Jiaming Zhang,Qiaobao Zhang,Changhong Wang,Ning Lin
标识
DOI:10.1021/acsami.6c13954
摘要
Silicon-based all-solid-state batteries (ASSBs) promise high energy density for next-generation energy storage systems. However, the poor solid-solid contact between silicon (Si) and the solid-state electrolyte (SSE), coupled with interfacial instability during cycling, leads to lithium trapping and parasitic reactions, resulting in a low initial coulombic efficiency (ICE). Herein, we report a solution-assisted in situ polymerization and prelithiation strategy to construct a highly ion-conductive interphase via reductive passivation for Si anodes. Lithium biphenyl replenishes active lithium while inducing the in situ formation of a highly stable hybrid interphase composed of polybiphenyl, lithium bis(trifluoromethanesulfonimide) (LiTFSI), and reductively passivated lithium fluoride. The electrochemically stable and ion-conductive interphase minimizes interfacial ion-transport resistance while suppressing SSE decomposition. The engineered anode delivers an ICE of 100.6% with a high electrode-level reversible capacity of 3215 mAh g-1 at the electrode level, enabling an ICE of 96.4% in LiCoO2 full cells (6.2 mAh cm-2) with 96.6% capacity retention after 300 cycles at 1 C. The all-solid-state pouch cell demonstrates a high energy density of 313 Wh kg-1 with 92.7% capacity retention after 100 cycles. This work underscores the critical role of stable ion-conductive interphase design at Si anodes and provides a viable strategy toward practical high-energy-density ASSBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI