材料科学
超声波传感器
激发
激光器
锁孔
空化
表面光洁度
表面粗糙度
谐振器
光学
同步加速器
休克(循环)
声学
气泡
超声波
铝
不稳定性
微观结构
反射(计算机编程)
相(物质)
振幅
热的
微型加热器
光电子学
复合材料
合金
作者
Lovejoy Mutswatiwa,Dukyong Kim,Ian C. Bacon,Nathan Kizer,Sihang Feng,Olivia C. Van Fleet,Kyle A. Mumm,Samuel J. Clark,Kamel Fezzaa,Judith A. Todd,Andrea P. Argüelles,Tao Sun,Christopher M. Kube
摘要
High-intensity ultrasound application during metal additive manufacturing (AM) promotes microstructural refinement and reduces defects. These benefits are attributed to acoustic cavitation-induced shock waves, acoustic streaming, and localized thermal effects. Conventional ultrasonic processing employs high-power excitation near 20 kHz, where increased acoustic intensity enhances cavitation and microstructural benefits. However, in AM, high-intensity ultrasound results in increased surface roughness and reduced dimensional accuracy. To address these limitations, high-frequency ultrasonic excitation with sub-10-nm amplitudes was applied to melt pools generated under powder bed fusion–laser beam (PBF–LB) conditions. Melt pool dynamics and solidification behavior with and without excitation were directly observed using high-speed X-ray imaging. This work investigates whether mechanisms responsible for microstructural refinement and defect reduction under conventional 20 kHz excitation persist at higher frequencies. A stepped cylindrical resonator with a longitudinal resonant frequency of 570.79 kHz was fabricated via PBF–LB. Simultaneous laser melting, excitation at resonance, and X-ray imaging were done at Argonne National Lab. The results reveal rapid bubble nucleation, collapse, and transport away from the solidification front toward the keyhole and melt pool surface, reducing keyhole instability and porosity. A pathway toward realizing ultrasonic processing benefits in AM while preserving process stability is demonstrated.
科研通智能强力驱动
Strongly Powered by AbleSci AI