Fiber-Optic Photoacoustic CO Sensor for Gas Insulation Equipment Monitoring Based on Cantilever Differential Lock-In Amplification and Optical Excitation Enhancement

A fiber-optic photoacoustic CO sensor for gas insulation equipment is proposed, which relies on F–P interferometric cantilever-based differential lock-in amplification and optical multipass excitation enhancement. The sensor has excellent characteristics of high sensitivity, antielectromagnetic interference, fast response, and long-distance detection. The photoacoustic pressure waves in the two resonators of the differential photoacoustic cell (DPAC) are simultaneously detected by two fiber-optic interferometric cantilevers and processed differentially; thereby, the gas flow noise is effectively suppressed. Based on the comprehensive analysis of the superposition of photoacoustic excitation and multipass absorption, the diameter of the resonator is determined to be 6 mm. The optical power emitted by the 1566.6 nm distributed feedback laser is increased to 500 mW by an erbium-doped fiber amplifier. The near-infrared light is reflected 30 times in the multipass cell, which improves the order of magnitude of optical effective excitation. Due to the low sound velocity of SF6 gas, the resonant frequency of the DPAC with a resonator length of 80 mm is 760 Hz. The response time to CO/SF6 gas is 93 s with a flow rate of 500 sccm. The detection limit of the CO sensor is 53 ppb, which realizes the accurate and timely perception of the SF6 decomposition derivative CO and provides technical support for trouble-free operation of gas insulation equipment.