润滑
粗糙度(岩土工程)
表面粗糙度
材料科学
表面光洁度
摩擦学
曲率半径
机械
曲率
接触力学
压力(语言学)
复合材料
有限元法
结构工程
几何学
工程类
物理
流量平均曲率
哲学
语言学
平均曲率
数学
作者
Deliang Hua,Xiujiang Shi,Wen Fu Sun,Xiqun Lu,Anne Neville
标识
DOI:10.1177/14680874241266301
摘要
Due to the effects of transient load, curvature, speed and surface micro-topography, the marine cam-tappet pair usually works in harsh mixed lubrication state. In this paper, considering the effect of surface roughness, based on the three-dimensional (3D) line-contact mixed EHL model, the transient lubrication state of cam-tappet pair is analyzed. Results show the presence of three-dimensional surface roughness will affect fluctuations in film thickness and pressure clearly, while excessive roughness also cause local stress concentration, the asperity contact and zero film thickness. The lubrication effects of different machined surface methods are compared, and it found that the smallest film thickness ratio occurs as the ground surfaces contact, and lubrication state is very harsh, however, the polished surface can significantly improve lubrication state of the cam-tappet pair. Under low-speed conditions, the contact area ratio is greatly increased, which may cause serious stress concentration and excessive wear. By optimizing the base circle radius, the load-bearing capacity of cam-tapper pair improves clearly and the lubrication state is improved.
科研通智能强力驱动
Strongly Powered by AbleSci AI