嫁接
胺气处理
金属
解吸
热稳定性
金属有机骨架
化学工程
动力学
化学
无机化学
有机化学
工程类
吸附
物理
聚合物
量子力学
作者
Fengsheng Liu,Tao Wang,Hao Dong,Weishan Liu
标识
DOI:10.1016/j.cej.2022.140431
摘要
• Modified MOFs by grafting process between metal sites and secondary amines of AEEA. • Carrier with high surface area, pore volume, and low acidity are deemed preferable. • Excellent thermal/cold stability, and kinetics performance in DAC are obtained. • Direct air CO 2 capture cycles with low energy consumption were established. This study aimed to improve the carbon dioxide (CO 2 ) capture and kinetics performance for direct air capture (DAC) while demonstrating the amine grafting reaction principles and its constraints using N-(2-aminoethyl)ethanolamine (AEEA) to functionalize coordinatively unsaturated metal sites in MIL-100(Fe), UiO-66(Zr), and MIL-100(Cr). Grafting experiments indicated that the grafting process is the reaction between metal sites and secondary amines of AEEA, while MOFs with high surface area and low acidity can effectively promote amine grafting without destroying the active site. Moreover, the adsorbed CO 2 amounts of MF-Cr-AEEA at 400 ppm were 1.91 mmol/g of -25 °C and 2.42 mmol/g of 0 °C, and the structural decomposition temperature exceeded 400 °C, demonstrating excellent thermal and cold stability. As a result of the better crystal and surface structure, the internal heat and mass transfer processes were accelerated, resulting in low semi-adsorption times below 21 min. Moreover, CO 2 capture cycles were established at 25 °C for adsorption and 80 °C for desorption. The results show that the adsorption capacity of MF-Cr-AEEA remained 1.86 mmol/g after seven cycles, demonstrating low renewable energy consumption and high stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI