材料科学
形状记忆合金
合金
马氏体
假弹性
纳米晶材料
温度循环
磁滞
微观结构
钛镍合金
绝热过程
复合材料
无扩散变换
相(物质)
热稳定性
残余应力
热的
冶金
压力(语言学)
下降(电信)
结构稳定性
退火(玻璃)
拉伤
钛合金
转化(遗传学)
猝灭(荧光)
纳米晶
热膨胀
作者
Pengfei Dang,Y.N. Chen,Wei Gu,Yumei Zhou,Xiangdong Ding,Jun Sun,Dezhen Xue
标识
DOI:10.1002/adfm.202520629
摘要
Abstract The development of a Ni‐rich TiNiCu alloy that achieves both large functional output and exceptional cyclic stability, addressing a challenging trade‐off in shape memory alloy design, is reported. By tuning the Ni/Ti ratio, the B19 martensite phase is stabilized at low Cu concentrations, enabling a direct B2–B19 transformation with low thermal hysteresis and preserved processability. The optimized Ti 49.2 Ni 44.8 Cu 6 alloy exhibits a large adiabatic temperature change ( Δ T ad ) of 20.3 K, and high recoverable strain above 5% with low stress hysteresis. Thermal cycling shows negligible degradation in transformation temperatures and latent heat after 5000 cycles, while elastocaloric test reveals only a 2% drop in Δ T ad after 200 cycles. Superelastic testing on micropillars confirms stable recoverable strain of 4.3% after 10 6 cycles. These robust properties arise from two key design features: a compositionally tuned transformation pathway that promotes twinless B19 martensite formation with large spontaneous strain, and a nanocrystalline microstructure strengthened by residual dislocations and nanoprecipitates that suppress plasticity. This integrated design strategy offers a scalable route toward high‐performance TiNi‐based alloys, with promising potential for solid‐state cooling and superelastic medical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI