材料科学
微观结构
铁氧体(磁铁)
针状铁素体
韧性
冶金
体积分数
针状的
复合材料
扫描电子显微镜
脆性
贝氏体
马氏体
作者
Zicheng Liu,Peng Gao,Jia-kuan Ren,Chenggang Li,Wu-bo Zhong,Hu Zhan,Zhenyu Liu
标识
DOI:10.17222/mit.2020.234
摘要
Based on pure melting, multi-type and fine-microstructure design, a ferritic steel with an outstanding combination of cryogenic impact toughness and strength was fabricated. The microstructure was characterized by means of optical microscopy, electron back-scattered diffraction and transmission electron microscopy. The steels with different final cooling temperatures of 663 °C and 560 °C show ferrite and perlite microstructure, and ferrite grain size can be refined from 3.15 µm to 2.67 µm by lowering the final cooling temperature from 663 °C to 560 °C. Moreover, a higher volume fraction of acicular ferrite and polygonal ferrite can be obtained for a lower final cooling temperature of 560 °C. Hence, the cryogenic impact toughness can be enhanced, and the brittle failure can be suppressed, even at –110 °C, showing a higher impact toughness compared with other ferritic steels.
科研通智能强力驱动
Strongly Powered by AbleSci AI