高温合金
材料科学
扫描电子显微镜
基质(水族馆)
氧化物
冶金
图层(电子)
高温腐蚀
溅射沉积
溅射
腐蚀
复合材料
薄膜
微观结构
纳米技术
地质学
海洋学
作者
Atikur Rahman,R. Jayaganthan,Satya Prakash,Vikas Chawla,Ramesh Chandra
标识
DOI:10.1179/026708408x339064
摘要
The cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings fabricated by direct current magnetron sputtering on the superalloy substrate has been studied in the present work. The microstructural features of the as deposited coatings were characterised by field emission scanning electron microscopy, atomic force microscopy and X-ray diffraction. The weight change measurements were made to calculate the cyclic oxidation kinetics of the coatings, in air at 900°C. It was observed that the corrosion rate of sputtered Cr/Al multilayer coated superalloy is lower than that of the uncoated superalloy due to the formation of continuous, dense, adherent and protective oxide scale over the surface of the coatings. The protective oxide scales are basically the thin layer of Cr 2 O 3 and Al 2 O 3 , which has formed over the Cr/Al multilayer coated superalloy substrate exposed to air at a temperature of 900°C.
科研通智能强力驱动
Strongly Powered by AbleSci AI