普鲁士蓝
材料科学
纳米复合材料
循环伏安法
碳纳米管
介电谱
检出限
傅里叶变换红外光谱
电极
纳米管
电化学
扫描电子显微镜
化学工程
薄膜
纳米颗粒
分析化学(期刊)
纳米技术
复合材料
化学
有机化学
工程类
物理化学
色谱法
作者
Dan Du,Minghui Wang,Yuehua Qin,Yuehe Lin
摘要
Prussian Blue–multiwalled carbon nanotube-modified gold (PB–MWCNT/Au) electrodes were successfully fabricated using the electrochemical co-deposition method in which the MWCNTs not only act as a carrier of PB, but also as a modifier for a catalytic function. Fourier transform infrared spectra proved that PB assembled on the surface of MWCNTs through electrochemical co-deposition. Scanning electron microscopy images showed that a relatively porous PB–MWCNT film was formed. Cyclic voltammetry and electrochemical impedance spectroscopy revealed that a PB-coated MWCNTs composite film improved electron and ion transfer relative to pure PB films and also exhibited larger electrode-specific capacitance than PB alone. Compared with a PB film, the PB–MWCNT composite film showed a larger response current to the reduction of H2O2 because of the synergistic effects between the MWCNTs and PB particles. This fast, sensitive, and efficient sensor for H2O2 was observed with a detection sensitivity of 856 μA mM−1 cm−2, and the linear range spanned the concentration of H2O2 from 1 μM to 5 mM. The detection limit was 23 nM at a signal-to-noise ratio of 3. The method presented here demonstrates the great potential for CNTs and other inorganic or metal nanoparticles for constructing bioelectronic devices and biosensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI