锥形量热计
电解质
量热法
材料科学
闪点
分析化学(期刊)
热失控
傅里叶变换红外光谱
热重分析
差示扫描量热法
碳酸盐
量热计(粒子物理)
燃烧
化学
化学工程
烧焦
探测器
热力学
无机化学
电极
光学
色谱法
物理
有机化学
电池(电)
物理化学
工程类
冶金
功率(物理)
作者
Que Huang,Song Lu,Xiaozhao Liu,Kaihui Zheng,Dengji Xu,Changcheng Liu
标识
DOI:10.1016/j.csite.2021.100912
摘要
During the thermal runaway (TR) processing of lithium-ion batteries (LIBs), electrolyte would release most of the heat as the main component. Thus, study on the fire risk of electrolyte is conductive to quantitatively evaluate the safety of LIBs. In this work, the combustion characteristics of three kinds of carbonate mixture electrolytes and the composition of residue were investigated. The significant parameters from the cone calorimeter tests reflecting the thermal hazards such as heat release rate (HRR), mass loss rate (MLR) and open cup flash point were measured. The HRR curves at the radiant power of 15 and 25 kW/m2 were more gradual than those at 35 kW/m2 which had one or two apparent peaks. The addition of diethyl carbonate (DEC) increased the HRRs significantly. The applicability of thermal chemistry (TC) theory used to calculate HRR in previous works was studied. The results of TC technique had a disparity with those from the cone calorimeter called oxygen consumption (OC) calorimetry especially for the electrolyte containing DEC, which was proved by thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR) experimental results, while it is different from the conclusion reported in previous study. The constituent of carbonate electrolytes residue was analyzed by the X-ray Fluorescence (XRF). Element fluorine (F) accounted for over 90% of the residue. The open cup flash point and ignition temperature were determined by the open cup flash point apparatus. The results showed that the fire point was very close to the open cup flash point, and the difference was within 0.1 K.
科研通智能强力驱动
Strongly Powered by AbleSci AI