材料科学
镍
热解
多孔性
碳纤维
金属
过渡金属
化学工程
催化作用
兴奋剂
复合数
化学
冶金
复合材料
有机化学
工程类
光电子学
作者
Tengfei Zhang,Hong Ping Xiao,Xiao Min Liang,Fanchao Zhang,Huifeng Zhuang,Qiuming Gao,Lirong Zheng
出处
期刊:Small
[Wiley]
日期:2022-06-02
卷期号:18 (26): e2201996-e2201996
被引量:16
标识
DOI:10.1002/smll.202201996
摘要
Abstract A universal strategy is established for preparing the carbonaceous matrix‐based atomically distributed metal catalysts M‐BPC (M=Ni, Co, Fe, Cu, and Mn, and biomass‐derived porous carbon (BPC)) by one‐step pyrolysis of mixed metal salts and biomass alfalfa. The optimized Ni‐BPC has dual‐atom Ni(II)2N4(µ2‐N)2 moieties, which are chemically anchored on the alfalfa‐derived developed porous N‐doped carbon BPC matrix. An ultrahigh specific surface area of 3133 m2 g−1 with huge total pore volume of 3.02 cm3 g−1 is obtained for Ni‐BPC. The Ni‐BPC could greatly promote the redox kinetics and effectively prevent the shuttle effect of lithium polysulfides in a Li–S battery. The Li–S battery assembled with the Ni‐BPC modified separator exhibits prominent rate performance with the reversible specific capacities of 1279, 1119, 1037, 948 and 787 mAh g−1 at the current densities of 0.1, 0.2, 0.5, 1 and 2 C, respectively. The battery presents an ultra‐long life with low capacity decay of 0.028% per cycle up to 2100 cycles at 1 C. Even under high areal S loadings of 3.9 mg cm−2, the high discharge capacity of 976.6 mAh g−1 is obtained at 0.2 C and excellent cycling stability with 61.1% capacity retention is achieved after 490 cycles.
科研通智能强力驱动
Strongly Powered by AbleSci AI