解聚
化学
聚对苯二甲酸乙二醇酯
对苯二甲酸
乙二醇
氯化胆碱
水解
核化学
单体
对苯二甲酸二甲酯
高分子化学
结晶度
有机化学
聚合物
材料科学
聚酯纤维
复合材料
结晶学
作者
Muhammad Azeem,Margaret Brennan Fournet,Olivia A. Attallah
标识
DOI:10.1016/j.arabjc.2022.103903
摘要
Effective and efficient hybrid depolymerisation technologies are emerging as high potential sustainable routes with considerable benefits over conventional recycling methods for the achievement of circular economies for plastics.Herein, combined green and fast glycolysishydrolysis depolymerization of polyethylene terephthalate (PET) was carried out under microwave irradiation (MW) with excellent efficiencies.In MW assisted glycolysis of PET, the catalytic activity of two deep eutectic solvents (DES) based on (choline chloride-urea (DES 1)) and (choline chloridethiourea (DES 2)) was evaluated and compared.Optimised glycolysis conditions were determined using Box Behnken Design (BBD) to attain maximum weight loss of PET, low crystallinity and increased carbonyl index of residual PET.DES volume of 4 mL, 5.5-6 mL of ethylene glycol, and 0.5 min MW irradiation time resulted in a prominent rise in PET weight loss and carbonyl index of residual PET.DES 2 showed an improved catalytic activity than that of DES 1 which is associated to its stronger interaction with EG and PET polymer chains during the course of the reaction.Residual PET obtained post glycolysis reaction was further depolymerized using MW assisted hydrolysis in the presence of weakly basic Na 2 CO 3 and EG.Within 3-minute, the proposed sequential depolymerization technologies facilitated %99% conversion of PET to terephthalic acid (TPA), monohydroxyethyl terephthalate (MHET), and bis (2-hydroxyethyl) terephthalate (BHET) monomers produced at a yield of 62.79-80.66%,17.22-34.79%and 0.54-0.59%respec-
科研通智能强力驱动
Strongly Powered by AbleSci AI