焊接
材料科学
压痕硬度
搅拌摩擦焊
熔焊
合金
微观结构
极限抗拉强度
转速
冶金
拉伸试验
光学显微镜
铝
扫描电子显微镜
铝合金
复合材料
机械工程
工程类
作者
Sare Çelik,Fatmagül Tolun
出处
期刊:MP MATERIALPRUEFUNG - MP MATERIALS TESTING
[De Gruyter]
日期:2021-09-01
卷期号:63 (9): 829-835
被引量:7
摘要
Abstract AA5754Al alloy is widely used in industry. However, as in the case of all Al alloys, the 5xxx series Al alloys cannot be easily joined through fusion welding techniques. To address this problem, in this study, the effect of double-sided friction stir welding at various tool rotational speeds (450, 710, and 900 rpm), feeding rates (40, 50, and 80 mm × min -1 ), and tool tilt angles (0°, 1°, 2°) on the welding parameters and mechanical and microstructural characteristics of AA5754 Al alloy was determined. Tensile strength tests and microhardness tests were performed to examine the mechanical properties of the welded specimens. The microstructures of the welded zone were examined by obtaining optical microscopy and scanning electron microscopy images. The tensile test results indicated that the specimens exhibited the highest welding performance of 95.17 % at a tool rotational speed, feed rate, and tool tilt angle of 450 rpm, 50 mm × min -1 and 1°, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI