累积滚焊
材料科学
合金
电子背散射衍射
微观结构
复合材料
铝
变形(气象学)
降水
铸造
冶金
物理
气象学
作者
Zhigang Li,Hao Jiang,Minghui Wang,Hongjie Jia,Hongjiang Han,Pin-Kui Ma
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2021-07-27
卷期号:14 (15): 4200-4200
被引量:9
摘要
As the applications of heterogeneous materials expand, aluminum laminates of similar materials have attracted much attention due to their greater bonding strength and easier recycling. In this work, an alloy design strategy was developed based on accumulative roll bonding (ARB) to produce laminates from similar materials. Twin roll casting (TRC) sheets of the same composition but different cooling rates were used as the starting materials, and they were roll bonded up to three cycles at varying temperatures. EBSD showed that the two TRC sheets deformed in distinct ways during ARB processes at 300 °C. Major recrystallizations were significant after the first cycle on the thin sheet and after the third cycle on the thick sheet. The sheets were subject to subsequent aging for better mechanical properties. TEM observations showed that the size and distribution of nano-precipitations were different between the two sheet sides. These nano-precipitations were found to significantly promote precipitation strengthening, and such a promotive effect was referred to as hetero-deformation induced (HDI) strengthening. Our work provides a new promising method to prepare laminated heterogeneous materials with similar alloy TRC sheets.
科研通智能强力驱动
Strongly Powered by AbleSci AI