材料科学
微观结构
冶金
晶间断裂
晶界
断口学
极限抗拉强度
合金
穿晶断裂
断裂(地质)
复合材料
作者
D.W. Roh,Jae Wook Kim,T. J. Cho,Y.G. Kim
标识
DOI:10.1016/0921-5093(91)90438-s
摘要
The effects of microalloying additions (0.3Ti, 3Ti-0.2Mn, and 0.3Ti-0.6Zr) to a β Cu-13Al-3Ni shape memory alloy on the tensile properties, shape recovery capacity and microstructure were investigated. It was found that the tensile properties,(σt, σf and ϵf) lie roughly on a straight line according to a Hall-Petch relationship. The highest fracture stress (903 MPa) and fracture strain (8.6%) were obtained in the Cu-13.4Al-3.05Ni-0.24Ti-0.63Zr alloy. Fractography revealed a change from the intergranular to the transgranular fracture mode. Grain boundary cracking was markedly suppressed by the microalloying additions and the fracture model lso changed from brittle to ductile with decreasing grain size of the β phase. The investigated alloys were fully martensitic consisting of internally faulted M18R and internally twinned N2H types.
科研通智能强力驱动
Strongly Powered by AbleSci AI