Self‐assembly morphology evolution of the polyamide 6 (PA6) component in the PA6/polyethylene glycol system by in situ polymerization of ϵ‐caprolactam monomer

Abstract This paper describes the morphology evolution of polyamide 6 (PA6) components in the presence of polyethylene glycol (PEG) by self‐assembly via in situ anionic ring‐opening polymerization of ϵ‐caprolactam (CL) monomer and expands the study of morphology changes of PA6 in the PA6/PEG system. With a fixed mass ratio of [CL]/[PEG], it was found that by simply changing the reaction conditions the morphology of PA6 components could be changed from nano‐sized microspheres to regular 3D microsphere structured polyhedrons to 3D nano‐sized particle clusters to micro‐scale microspheres. The morphologies of the PA6 components were investigated by SEM and TEM analyses. The diameter range of the PA6 nano‐sized microspheres was controlled within 400 nm. The side length of an individual polyhedron could be effectively tuned from 10 µm to 100 µm. The diameter range of micrometer microspheres was about 5–8 µm. The results suggest that this strategy for self‐assembly can be applied to design materials with complex geometric structures. © 2018 Society of Chemical Industry