材料科学
复合材料
聚乙烯
聚丙烯
极限抗拉强度
天然橡胶
图层(电子)
电导率
复合数
电场
真空隔热板
可靠性(半导体)
电压
导电体
失真(音乐)
过渡层
高压
介电强度
电流(流体)
电阻率和电导率
空间电荷
原位
电植树
拉伸应变
接口(物质)
绝缘系统
变形(气象学)
作者
Rongjie Hou,Zhaotong Meng,Tiandong Zhang,Changhai Zhang,Huiyang Zhang,Haobo Wang,Tongqin Zhang,Jiaqi Zhang,Zhiqiang Wang,Qingguo Chi
摘要
ABSTRACT Charge accumulation and electric field distortion at heterogeneous interfaces critically affect the insulation reliability of high‐voltage direct current (HVDC) cable accessories. This study evaluates polypropylene (PP) as an environmentally friendly alternative to cross‐linked polyethylene (XLPE), emphasizing the electrical behavior at the PP/silicone rubber (SiR) interface. PP shows lower conductivity and higher tensile strength than XLPE, but suffers from interfacial charge accumulation and poor compatibility. To mitigate these issues, a SiO 2 transition layer was in situ grown on SiR via the TEOS sol–gel method. The modification increased surface density, introduced deep traps, and improved interfacial bonding, thereby suppressing carrier transport. At a TEOS:EtOH ratio of 1:6, the modified SiR achieved a breakdown strength of 141.77 kV/mm and an interfacial breakdown voltage of 20.87 kV, exceeding that of the XLPE/SiR interface. These results provide a theoretical and experimental basis for applying PP in HVDC cable accessories and optimizing composite insulation interfaces.
科研通智能强力驱动
Strongly Powered by AbleSci AI