螺旋(铁路)
执行机构
开发(拓扑)
声学
压电
运动(物理)
物理
线性执行器
控制理论(社会学)
工程类
材料科学
机械工程
压电马达
运动控制
有限元法
直线运动
结构工程
机械
精密工程
作者
Jianhua Sun,Deheng Li,Jie Deng,Bingwei Zhang,Yingxiang Liu
标识
DOI:10.1109/tie.2026.3732404
摘要
Stick-slip piezoelectric actuators offer advantages of cross-scale motion, simple structure, and uncomplicated exciting systems. However, traditional rigid guiding mechanisms suffer from friction, wear, and transmission gaps, affecting the vertical motion capability and motion stability. In contrast, flexure guiding mechanisms feature no friction and no gap but exhibit an inherent contradiction between stroke and dimension. This work proposes a stick-slip linear piezoelectric actuator (LPA) with frictionless spiral flexure guidance. Specifically, the elongated beam configured in a spiral type reduces the dimensions while maintaining cross-scale motion capability. Importantly, the spiral flexure guide promotes more uniform deformation and reduces local stress concentration. Theoretical and finite element models are established to guide structural design in detail for optimal stiffness distribution. Experimental results demonstrate that the actuator reaches cross-scale vertical motion with a downward motion resolution of 13.0 nm and a stroke of 4.836 mm. The radial coupling displacement remained less than$\boldsymbol{\pm}$0.22$\boldsymbol{\mu}$m within a stroke of 187.39$\boldsymbol{\mu}$m, and the step deviations of 720 steps were less than 6.5%. Meanwhile, the maximum positioning error was 0.3095$\boldsymbol{\mu}$m for a target displacement of 50$\boldsymbol{\mu}$m under dual-mode motion control. Furthermore, the actuator with frictionless spiral flexure guidance demonstrated its potential for cross-scale vertical positioning.
科研通智能强力驱动
Strongly Powered by AbleSci AI