声学
色散(光学)
导波测试
电磁声换能器
激发
传感器
兰姆波
非正弦波形
光学
材料科学
物理
表面波
超声波传感器
波形
超声波检测
电压
量子力学
作者
Songtao Hu,Zhichao Li,Runjie Yang,Dongmei Wang,Guofu Zhai,Steve Dixon
标识
DOI:10.1080/10589759.2023.2299794
摘要
The component with variable width (such as railway turnout) is one of the most critical configurations in infrastructure. Guided waves have already been employed for flat plates, however, the influence of cross-section width change for guided waves can’t be ignored. In this study, the theoretical cut-off frequency of shear-horizontal (SH)-like guided waves in rectangular plate was analysed. The dispersion curves of rectangular plate with different widths were calculated by the periodic finite element (FE) method. Theoretical calculations and dispersion curves both show that the cut-off frequency of SH-like guided waves decreases when the width of rectangular plate increases. A periodic-permanent-magnet (PPM) electromagnetic-acoustic-transducer (EMAT) at the excitation frequency of 200 kHz was constructed and used in the experiments to generate SH-like guided waves on rectangular plates with the widths of 12 mm and 20 mm, respectively. Experimental results show that multiple wave modes of SH-like guided waves appear as the width of the rectangular plate increases. When the SH-like guided waves propagates in a rectangular plate with variable width, the high-order modes will be cut-off and reflected as the width decreases.
科研通智能强力驱动
Strongly Powered by AbleSci AI