Preparing and Applying Silver Nanoparticles in Conductive Ink and Inkjet Painting

Noble metal nanoparticles have special properties in optical, electronic, and physical chemistry due to their high surface area and volume. With the development of electronic printing technology, inkjet printing has gradually replaced traditional spin coating and blade coating, since it leads to more material savings and a faster batch production, and the pattern can be easily designed by a computer. In this study, Ag nanoparticles were prepared by a chemical reduction method. Non-toxic, environment-friendly agents were selected to fabricate a single-shape, uniform-size, crystal-form, and monodisperse product. The effects of the reducing agent ratio and the stabilizer ratio on the size, shape, and stability of the nanoparticles are discussed. The silver nanoparticles were characterized by an ultraviolet-visible spectrophotometer (UV-vis) and a transmission electron microscope (TEM). In addition, in order to prepare conductive ink that can stably disperse for a long time and that can be applied to inkjet printing on a PET flexible substrate at a lower sintering temperature, a sintering agent and a commercial surfactant were added. The experimental results show that the best addition ratio of the precursor to the reducing agent and the stabilizer is 1:6:1. The conductive silver ink was printed and treated by a70 mM NaCl solution, and the electric resistivity was 5.17×10-4Ω· cm.