传感器
声学
振动
超声波传感器
有限元法
电阻抗
超声波加工
法国号角
机械加工
材料科学
工程类
轴对称性
结构工程
机械工程
电气工程
物理
作者
Vinod Satpute,Dehong Huo,John Hedley,Mohammed A. Elgendy
标识
DOI:10.1007/s00170-023-11154-1
摘要
Abstract Ultrasonic vibration–assisted machining (VAM) is a process in which a tool or workpiece is vibrated using ultrasonic frequency small-amplitude vibrations to improve cutting performance, and an ultrasonic transducer usually generates these vibrations. This study investigates how two-dimensional vibrations are generated using axially polled piezoceramics. Modifying the wave propagation in geometric ways by creating a notch at the front mass, the longitudinal response excited by the axially polled piezoceramic discs can be converted into combined longitudinal and bending vibrations at the transducer front mass. Finite element analysis (FEA) software COMSOL is used to study wave propagation, and ANSYS is used to optimize the transducer’s mechanical structure, while an equivalent circuit approach is used to analyze the electrical impedance spectra and confirm its resonance frequency. An experimental analysis of impedance response and amplitude of generated vibrations using the novel 2D ultrasonic transducer is conducted to validate the numerical and analytical results, which shows that resonance frequency results are in very good agreement with the theoretical model. Finally, the proposed design is validated by preliminary test results that demonstrate its performance and principles.
科研通智能强力驱动
Strongly Powered by AbleSci AI