材料科学
脆化
环境应力开裂
脆性
复合材料
涂层
极限抗拉强度
压力(语言学)
开裂
环境应力断裂
断裂(地质)
变形(气象学)
断裂力学
应力集中
腐蚀
氢脆
应力腐蚀开裂
哲学
语言学
标识
DOI:10.1016/j.porgcoat.2022.107085
摘要
Failure is defined by a coating's purpose, but a crack is a failure in almost every application. Cracks cause problems in service when they first arise, well before they are widespread. By itself, degradation of a polymer coating can cause cracks or adhesive failure, but several other sources of stress are possible. How do these stresses arise and how do coating properties change during service resulting in cracks? Moisture can produce swelling or blistering, entailing compressive stresses, but often tensile stresses also result at the same time. Environmental stress cracking causes embrittlement in polymers due to a combination of plasticisation and swelling caused by moisture. Seemingly small stresses, from thermal mismatch or bending, can initiate failure by repetition or due to a stress concentration. Polymers become brittle, manifested in several ways. Modulus and tensile strength may increase, but elongation and fracture surface energy diminish considerably. The Lake-Thomas theory allows estimates of how breaking bonds contributes to fracture surface energy but currently there is no settled model for calculating how mechanical dissipation contributes or changes. Degradation causes small defects to become more likely to initiate failure than in unweathered coatings and Poisson's ratio provides insight how 3-dimensional structure relates to potential cavitation. Not only do all these factors affect the overall coating film, but they also affect the internal integrity between the binder and other ingredients and thus failure can be initiated internally before it become apparent externally. • Sources of tensile, cracking-opening stress • Polymer embrittlement during degradation • Fracture energy changes during degradation.
科研通智能强力驱动
Strongly Powered by AbleSci AI