Improving Printability of Polytetrafluoroethylene (PTFE) with the Help of Plasma Pre-Treatment

聚四氟乙烯 材料科学 生物医学工程 复合材料 医学
作者
Marius Andrei Olariu,Rakel Herrero,Dragoș Astanei,Lisandro Jofré,Javier Morentin Encina,Tudor Alexandru Filip,Radu Burlică
出处
期刊:Polymers [Multidisciplinary Digital Publishing Institute]
卷期号:15 (16): 3348-3348 被引量:8
标识
DOI:10.3390/polym15163348
摘要

Polytetrafluoroethylene (PTFE) is a potential candidate for the fabrication of flexible electronics devices and electronics with applications in various extreme environments, mainly due to its outstanding chemical and physical properties. However, to date, the utilization of PTFE in printing trials has been limited due to the material's low surface tension and wettability, which do not ensure good adhesion of the printing ink at the level of the substrate. Within this paper, successful printing of PTFE is realized after pre-treating the surface of the substrate with the help of dielectric barrier discharge non-thermal plasma. The efficiency of the pre-treatment is demonstrated with respect to both silver- and carbon-based inks that are commercially available, and finally, the long-lasting pre-treatment effect is demonstrated for periods of time spanning from minutes to days. The experimental results are practically paving the way toward large-scale utilization of PTFE as substrate in fabricating printed electronics in harsh working environments. After 3 s of plasma treatment of the foil, the WCA decreased from approximately 103° to approximately 70°. The resolution of the printed lines of carbon ink was not time dependent and was unmodified, even if the printing was realized within 1 min from the time of applying the pre-treatment or 10 days later. The evaluation of the surface tension (σ) measured with Arcotest Ink Pink showed an increase in σ up to 40 < σ < 42 mN/m for treated Teflon foil and from σ < 30 mN/m corresponding to the untreated substrate. The difference in resolution was distinguishable when increasing the width of the printed lines from 500 μm to 750 μm, but when increasing the width from 750 μm to 1000 μm, the difference was minimal.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
猪猪侠完成签到,获得积分10
刚刚
刚刚
刚刚
英俊的铭的应助被xxx采纳,获得10
1秒前
水煮电吹风的应助被叶95采纳,获得10
1秒前
ylfs完成签到,获得积分10
1秒前
2秒前
bobo完成签到,获得积分10
3秒前
小艾同学发布了新的文献求助10
3秒前
see发布了新的文献求助10
4秒前
在水一方的应助被LILILILI采纳,获得30
5秒前
嘤嘤嘤完成签到,获得积分10
5秒前
5秒前
999完成签到,获得积分10
5秒前
123完成签到 ,获得积分10
6秒前
香蕉觅云的应助被祥子的骆驼采纳,获得10
7秒前
。。。完成签到,获得积分0
9秒前
自然思烟完成签到,获得积分10
10秒前
bbb发布了新的文献求助10
12秒前
冷酷以山发布了新的文献求助10
12秒前
anders完成签到 ,获得积分10
14秒前
进化又不带我完成签到 ,获得积分10
14秒前
15秒前
科研通AI6.3的应助被z啧啧啧采纳,获得10
15秒前
16秒前
昏睡的帆布鞋完成签到 ,获得积分10
17秒前
xwx发布了新的文献求助10
19秒前
沉默尔冬完成签到,获得积分10
19秒前
我是老大的应助被李老头采纳,获得10
19秒前
20秒前
GIN完成签到,获得积分10
20秒前
璇璇完成签到 ,获得积分10
21秒前
22秒前
无花果的应助被科研通管家采纳,获得30
22秒前
深情安青的应助被科研通管家采纳,获得10
22秒前
Owen的应助被科研通管家采纳,获得10
22秒前
aqqq的应助被科研通管家采纳,获得20
22秒前
aqqq的应助被科研通管家采纳,获得10
22秒前
田様的应助被科研通管家采纳,获得10
22秒前
aqqq的应助被科研通管家采纳,获得10
23秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Boundaries and Bodhisattvas 500
高分子基功能界面水蒸发材料与应用研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8181658
求助须知:如何正确求助?哪些是违规求助? 9571454
关于积分的说明 21818081
捐赠科研通 7777987
什么是DOI,文献DOI怎么找? 3433508
关于科研通互助平台的介绍 2557696
邀请新用户注册赠送积分活动 2479568