材料科学
微观结构
微晶
无定形固体
涂层
溅射沉积
溅射
复合材料
纤锌矿晶体结构
基质(水族馆)
成核
薄膜
冶金
结晶学
纳米技术
化学
地质学
海洋学
有机化学
锌
作者
Du‐Cheng Tsai,Rong‐Hsin Huang,Zue‐Chin Chang,Erh-Chiang Chen,Yen-Lin Huang,Fuh‐Sheng Shieu
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2025-04-05
卷期号:18 (7): 1671-1671
被引量:6
摘要
AlCrN and AlCrSiN coatings were deposited via reactive magnetron sputtering. This study investigates the effects of radio frequency (RF) substrate bias, ranging from 0 V to 200 V, on the chemical composition, microstructure, and mechanical properties of the coatings. All crystalline coatings exhibited a single wurtzite-type hexagonal close-packed (hcp) structure. At a 0 V substrate bias, the AlCrN coating consisted of porous V-shaped columnar crystallites, while the AlCrSiN coating exhibited a porous, fiber-like amorphous structure. As the substrate bias increased, crystal growth was promoted, void density decreased, and the surface morphology transitioned from a textured to a more rounded appearance. Additionally, the preferred orientation shifted toward the (101) direction. However, at excessively high substrate bias, re-nucleation occurred, leading to grain refinement and increased film densification, which in turn caused a further shift in the preferred orientation toward the (002) plane. Due to its multi-element composition and the low solubility of Si in nitrides, AlCrSiN coatings tend to exhibit an amorphous growth tendency during sputtering. As a result, their microstructure is more sensitive to substrate bias. This sensitivity results in the formation of a highly dense structure with an optimal crystallite size at a substrate bias of 100 V, leading to a hardness of 22.6 GPa-surpassing that of the AlCrN coating.
科研通智能强力驱动
Strongly Powered by AbleSci AI