电子线路
电气工程
电压
晶体管
功率(物理)
电流传送器
低功耗电子学
功率消耗
电子工程
低压
碳纳米管场效应晶体管
工程类
电容器
场效应晶体管
物理
量子力学
作者
Mohd Yasir,Naushad Alam
标识
DOI:10.1080/00207217.2020.1870743
摘要
This paper presents design of an ultra-low-power two-stage Op-Amp and Second-generation current conveyor (CCII) using gm/ID technique for portable applications like biomedical instruments, wireless sensor networks (WSNs), etc. The designed circuits are based on 20 nm Tunnel Field-Effect Transistor (TFET). The circuits use a single power supply of 0.9 V and provide improvements in many areas when compared with Carbon Nanotube FET (CNTFET) based circuits and existing TFET-based circuits. The simulation set up in HSPICE, provide very low-power consumption for the same performanceand provide much better performance for the same power consumption when compared with existing circuits. In the case of TFET-based Op-Amp, for the power consumption of 47.1 μW, the GBW and open-loop DC gain are 5.12 MHz and 75.9 dB, respectively. While for the power consumption of 107.1 μW, the GBW and open-loop DC gain are 9.01 MHz and 74.9 dB, respectively. In case of TFET-based CCII, for the power consumption of 82.3 μW, the 3-dB BW for Voltage and Current transfer gains are 700 MHz and 135 MHz, respectively. While for the power consumption of 173 μW, the 3-dB BW for Voltage and Current transfer gains are 1.12 GHz and 226 MHz respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI