材料科学
光电子学
磷化铟
砷化铟镓
激光器
连续波
金属有机气相外延
砷化镓
外延
硅
激光阈值
光子学
化学气相沉积
半导体
半导体激光器理论
砷化铟
量子阱
光子集成电路
光学
纳米技术
图层(电子)
波长
物理
作者
Bei Shi,Hongwei Zhao,Lei Wang,Bowen Song,Simone Šuran Brunelli,Jonathan Klamkin
出处
期刊:Optica
[Optica Publishing Group]
日期:2019-12-02
卷期号:6 (12): 1507-1507
被引量:61
标识
DOI:10.1364/optica.6.001507
摘要
Heteroepitaxy of III–V compound semiconductors on industry standard (001) silicon (Si) substrates is highly desirable for large-scale electronic and photonic integrated circuits. Challenges of this approach relate primarily to lattice, polarity, and coefficient of thermal expansion mismatch, which ultimately generate a high density of defects and limit the reliability of active devices. Ongoing efforts to monolithically integrate lasers in silicon photonics include leveraging quantum dots for reduced sensitivity to defects and the ability to enable 1310 nm lasers with gallium arsenide (GaAs) and related compounds. In this work, to extend the operation window to the widely used 1550 nm telecommunications region, we have demonstrated continuous-wave (CW) electrically pumped indium phosphide (InP)-based quantum well lasers on complementary metal-oxide-semiconductor (CMOS)-compatible (001) Si. Heteroepitaxy of InP and related compounds on Si poses additional challenges because the lattice mismatch is significantly larger compared to GaAs. Key to our approach is the development of a low dislocation density InP-on-Si template by metalorganic chemical vapor deposition (MOCVD). Following an InP buffer with a surface defect density of ${1.15} \times {{10}^8}/{{\rm cm}^2}$1.15×108/cm2, a seven-layer indium gallium arsenide phosphide (InGaAsP) multi-quantum well laser diode structure was grown. Fabry–Perot ridge waveguide lasers were then fabricated. A 20-µm wide and 1000-µm long laser demonstrates a room temperature continuous-wave (CW) lasing threshold current density of ${2.05}\;{{\rm kA}/{\rm cm}^2}$2.05kA/cm2 and a maximum output power of 18 mW per facet without facet coating. CW lasing up to 65°C and pulsed lasing greater than 105°C were achieved. This MOCVD-based heteroepitaxy approach offers a practical path toward monolithic integration of InP lasers in silicon photonics.
科研通智能强力驱动
Strongly Powered by AbleSci AI