合金
氢气储存
氢
杂质
材料科学
锆
锆合金
限制
冶金
钛合金
化学工程
化学
有机化学
机械工程
工程类
作者
Peng Lv,Changlin Zhong,Dongfang Huang,Xingsheng Zhou,Zhichen Liu,Ruixue Zhao
标识
DOI:10.1016/j.ijhydene.2022.04.041
摘要
In this work, the anti-impurity gas poisoning ability and hydrogen storage properties of Ti–Cr alloy by introducing zirconium as additive have been investigated. The results showed that all alloys had C14-type main phase and Ti minor phase. The lattice parameter a, c and cell volume of the C14-type phase rose as Zr content increased. Furthermore, after introducing Zr, all alloys could absorb hydrogen immediately without any prior heat treatment or hydrogen exposure with/without prolonged air exposure. The maximum hydrogen storage capacity and the average effective hydrogen storage capacity of TiCr2 alloy also increased with Zr content. The cycle properties of all alloys with/without prolonged air exposure were also discussed. The results showed that all alloys had good cycle stability even if the alloys were exposed to the air for 2 days. The above results suggested that the addition of Zr had a positive effect on improving the hydrogen storage properties and anti-impurity gas poisoning properties of TiCr2 alloy. Finally, the mechanisms of first hydrogenation kinetic of all alloys with/without prolonged air exposure were also investigated by using the rate limiting step.
科研通智能强力驱动
Strongly Powered by AbleSci AI