热的
工作(物理)
体积流量
机械工程
流量(数学)
机械
材料科学
汽车工程
工程类
热力学
物理
标识
DOI:10.1177/09544062221075171
摘要
During the operation of the high-speed motorized spindle, the heating of motorized spindle components can cause thermal deformations, which worsens the work performance and shortens the life expectancy of the motorized spindle. In response to the above behaviors, the thermal network model for the motorized spindle in this investigation was built in which the lubricating oil properties and contact characteristics were considered. Next, according to Kirchhoff's energy balance principle, the theoretical equations of steady-state temperature were established, and the temperature rise of the motorized spindle was obtained by Newton-Raphson method. Lastly, the influences of speed, cooling water flow rate, air flow rate and other variables on the temperature were analyzed and verified by the experiment. The results show that the thermal network model including lubricating oil and contact factors can predict the temperature rise of motorized spindle accurately, which provides some references and suggestions in motorized spindle design.
科研通智能强力驱动
Strongly Powered by AbleSci AI