The Cu-,Ni-and CuNi-based catalysts for furfural(FFR) liquid-phase hydrogenation were prepared by the calcination of the corresponding hydrotalcite-like precursors and characterized by XRD and H2-TPR techniques in the present work.At the same time,the effects of reduction activation temperature,hydrogenation temperature,H2 pressure,reaction time and catalyst amount on the FFR catalytic hydrogenation were also further investigated in details.The results showed that the CuNi-based catalysts(Cu11.2Ni4.7-MgAlO) exhibited an excellent catalytic property compared with the corresponding Cu-or Ni-based catalysts.Under the optimum conditions,Cu11.2Ni4.7-MgAlO gave a higher furfural conversion and furfuryl alchol selectivity of 95.6% and 93.1%,respectively.There was no obvious decrease in the catalytic properties to be observed during the catalyst cycle lifetime.