抵抗
材料科学
平版印刷术
X射线光电子能谱
电子束光刻
纳米技术
聚合物
氧化物
扫描电子显微镜
光电子学
乙二醇
透射电子显微镜
阴极射线
扫描透射电子显微镜
电子能量损失谱
纳米光刻
环氧乙烷
金属
光刻
光谱学
光掩模
化学工程
倍半硅氧烷氢
X射线光刻
作者
Minkyung Ko,Jiwoong Ham,Young Heon Kim,Hyeong‐U Kim,Nari Jeon
标识
DOI:10.1016/j.apsadv.2026.101003
摘要
As continued device scaling demands thinner photoresists with enhanced sensitivity and etch resistance, organic-inorganic hybrid resists have emerged as promising candidates by combining the processability of polymers with the mechanical robustness of inorganic components. In this study, we investigated poly(methyl methacrylate) (PMMA)-based hybrid resists synthesized via sequential infiltration synthesis (SIS) for high-resolution electron beam lithography, focusing on how metal oxide incorporation influences resist performance. SIS was applied to PMMA films using various precursor combinations – including trimethylindium, trimethylgallium, water, and ethylene glycol – to systematically examine the impact of different metal oxides on key lithographic metrics such as sensitivity, resolution, line width roughness, and line edge roughness. Hybrid resists synthesized using different SIS precursors and cycle numbers consistently exhibit enhanced sensitivity in negative-tone lithography, with the degree of improvement depending on the specific precursor employed. Comprehensive characterization using scanning transmission electron microscopy, electron energy loss spectroscopy, micro-Raman spectroscopy, and micro-X-ray photoelectron spectroscopy supports a structural model in which metal oxide motifs function as crosslinking centers, offering new insights into the molecular design of next-generation hybrid resists.
科研通智能强力驱动
Strongly Powered by AbleSci AI