壳聚糖
傅里叶变换红外光谱
滴定法
化学
特性粘度
扫描电子显微镜
核化学
产量(工程)
粘度
化学工程
材料科学
有机化学
复合材料
聚合物
工程类
作者
Aygül Küçükgülmez,Mehmet Çelik,Yasemen Yanar,Didem Şen,H. Polat,Ali Eslem Kadak
出处
期刊:Food Chemistry
[Elsevier BV]
日期:2010-12-02
卷期号:126 (3): 1144-1148
被引量:144
标识
DOI:10.1016/j.foodchem.2010.11.148
摘要
In this study, chitosan was extracted from Metapenaeus stebbingi shells. In order to determine physicochemical characteristics of the extracted chitosan, the yield, moisture and ash contents, degree of deacetylation, molecular weight, water and fat binding capacities, apparent viscosity and colour properties were measured using a variety of techniques including Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction. In addition, the physicochemical characteristics of the chitosan extracted from M. stebbingi shells were compared to commercial chitosan. The degree of deacetylation was calculated by the titration method and elemental analysis. The molecular weight was determined by viscosimetric methods. The results of the study indicate that shrimp shells are a rich source of chitosan as 17.48% of the shell’s dry weight is consisted of this material. Extracted chitosan exhibited a lower molecular weight, higher degree of deacetylation, higher viscosity and higher water and fat binding capacities compared to the commercial chitosan.
科研通智能强力驱动
Strongly Powered by AbleSci AI