三乙氧基硅烷
环氧树脂
材料科学
涂层
介电谱
腐蚀
氮化硼
复合材料
硼
六方氮化硼
表面改性
纳米材料
壳聚糖
电化学
化学工程
纳米技术
化学
有机化学
石墨烯
电极
物理化学
工程类
作者
Haidong Chen,Zongxue Yu,Jianbing Ye,Guangcheng Yang,Legang Chen,Yutao Pang,Lijuan Zhu,Junlei Tang,Yucheng Liu
标识
DOI:10.1016/j.colsurfa.2022.128941
摘要
A simple method was used to load theγ-Aminopropyl triethoxysilane (KH550) modified chitosan (CS) on the surface of hexagonal boron nitride(HBN) modified with polydopamine (PDA). The prepared material (HP-CS) was added into epoxy resin to fabricate high-efficiency anti-corrosion coating. Various characterization methods were used to study the dispersion and interfacial interaction of HP-CS in epoxy resin. In addition, electrochemical impedance spectroscopy (EIS) test results demonstrated that HP-CS/EP coating had good corrosion resistance, and the impedance modulus reached 8.83 × 109 Ω cm2. Furthermore, the impedance modulus of HP-CS/EP coating was about 2 orders of magnitude higher than the pure EP coating after 30 days of immersion.
科研通智能强力驱动
Strongly Powered by AbleSci AI