光纤布拉格光栅
材料科学
拉伤
光学
磷
氢氟酸
光纤传感器
波长
灵敏度(控制系统)
栅栏
温度测量
纤维
变形(气象学)
光电子学
复合材料
渐变折射率纤维
工程类
冶金
内科学
物理
医学
量子力学
电子工程
作者
Samir Kumar Mondal,Umesh Tiwari,G. C. Poddar,Vandana Mishra,Nahar Singh,Subhash C. Jain,S. N. Sarkar,K. D. Chattoypadhya,Pawan Kapur
摘要
A single fiber Bragg grating (FBG) sensor with two sections of different diameters is proposed and experimentally demonstrated for discrimination and measurement of strain and temperature. A section of single FBG is etched in hydrofluoric acid solution to reduce diameter of the fiber by factor of <1/2 to increase its strain sensitivity. Different shifts of the Bragg wavelengths of chemically etched and nonetched gratings caused by different strain sensitivities are used to discriminate and measure strain and temperature. Maximum errors of +/-13 microepsilon (microstrain) and +/-1 degrees C are reported over 1700 microepsilon and 60 degrees C measurement ranges, respectively. Depending upon the diameter of the etched fiber grating, the design can also discriminate nanostrain from temperature.
科研通智能强力驱动
Strongly Powered by AbleSci AI