格子Boltzmann方法
机械
阻力
聚结(物理)
两相流
颗粒流
流量(数学)
多相流
浸入边界法
粒子(生态学)
边值问题
流体力学
阻力系数
材料科学
物理
边界(拓扑)
数学
地质学
数学分析
海洋学
天体生物学
量子力学
作者
M. Dietzel,Martin Ernst,Martin Sommerfeld
出处
期刊:ASME/JSME/KSME 2015 Joint Fluids Engineering Conference
日期:2011-01-01
卷期号:: 1697-1707
被引量:7
标识
DOI:10.1115/ajk2011-04033
摘要
The Lattice-Boltzmann-Method (LBM) is a powerful and robust approach for calculating fluid flows in complex geometries. This method was further developed for allowing the calculation of several problems relevant to particle-laden flows. For that purpose two approaches have been developed. The first approach concerns the coupling of the LBM with a classical Lagrangian procedure where the particles are considered as point-masses and hence the particles and the flow around them are numerically not resolved. As an example of use, the flow through a single pore was considered and the deposition of nano-scale particles was simulated. The temporal evolution of the deposit structures is visualised and both the filtration efficiency and the pressure drop are simulated and compared with measurements. In the second developed LBM-approach, the particles are fully resolved by the numerical grid whereby the flow around particles is also captured and it is possibly to effectively calculate the forces on complex particles from the bounce-back boundary condition. As a case study the flow around spherical agglomerates consisting of mono-sized spherical primary particles is examined. Using local grid refinement and the curved wall boundary condition accurate simulations of the drag coefficient of such complex particles could be performed. Especially the effect of porosity on the drag was analysed. Finally, a scenario with moving particles was considered, namely, the sedimentation of a cluster of particles. In these simulations the primary particles were allowed to stick together and form agglomerates.
科研通智能强力驱动
Strongly Powered by AbleSci AI