FSformer: A combined frequency separation network and transformer for LDCT denoising

Low-dose computed tomography (LDCT) has been widely concerned in the field of medical imaging because of its low radiation hazard to humans. However, under low-dose radiation scenarios, a large amount of noise/artifacts are present in the reconstructed image, which reduces the clarity of the image and is not conducive to diagnosis. To improve the LDCT image quality, we proposed a combined frequency separation network and Transformer (FSformer) for LDCT denoising. Firstly, FSformer decomposes the LDCT images into low-frequency images and multi-layer high-frequency images by frequency separation blocks. Then, the low-frequency components are fused with the high-frequency components of different layers to remove the noise in the high-frequency components with the help of the potential texture of low-frequency parts. Next, the estimated noise images can be obtained by using Transformer stage in the frequency aggregation denoising block. Finally, they are fed into the reconstruction prediction block to obtain improved quality images. In addition, a compound loss function with frequency loss and Charbonnier loss is used to guide the training of the network. The performance of FSformer has been validated and evaluated on AAPM Mayo dataset, real Piglet dataset and clinical dataset. Compared with previous representative models in different architectures, FSformer achieves the optimal metrics with PSNR of 33.7714 dB and SSIM of 0.9254 on Mayo dataset, the testing time is 1.825 s. The experimental results show that FSformer is a state-of-the-art (SOTA) model with noise/artifact suppression and texture/organization preservation. Moreover, the model has certain robustness and can effectively improve LDCT image quality.