Gate-controlled Sb2S3 thin film photodetectors for logic switches

Antimony sulfide (Sb2S3) photodetectors (PDs) have great potential in commercial applications. The performances are affected by photocarrier distribution and recombination. Here, the gate-controlled Sb2S3 thin film PD is fabricated on the TiO2/SiO2/Si substrate by the vacuum method. The p-channel Sb2S3 transistor obtained a threshold voltage of 0.6 V and a switching ratio of 1064, achieving an effective regulation by gate voltages. A negative gate voltage can enhance conductivity and can suppress recombination. The responsivity and detectivity of the PD reach 1.6 A/W and 1.2 × 1011 Jones, respectively. The device realizes logic outputs by the signal inputs of illumination and gate voltage.