材料科学
吸收率
铜
选择性表面
氧化物
氧化钴
热稳定性
氧化铜
退火(玻璃)
涂层
大气温度范围
冶金
光电子学
复合材料
光学
化学工程
热力学
反射率
工程类
物理
作者
K.P. Sibin,Karunesh Kant,Ranga Pitchumani
标识
DOI:10.1021/acsaem.3c01224
摘要
The solar absorptance of a thermal receiver surface significantly affects the photothermal conversion efficiency of concentrating solar power (CSP) plants. The stability of solar receivers and coatings applied to improve solar absorptance at high temperatures is critical for efficient and long-term operation. This study analyzes the high-temperature air stability of multiscale fractal textured electrodeposited copper manganese oxide and copper cobalt oxide solar receiver coatings over a range of temperatures. The study also investigates the effect of high temperature on the phase stability, chemical and morphological evolution, and optical properties of the two solar absorber materials. A computational model is developed to determine the absorptance of the textured absorbers and is shown to match the experimental measurements closely over a range of heat treatment temperatures from 450 to 850 °C and durations up to 100 h. Degradation curves and coating stability maps are developed from the study. Copper manganese oxide and copper cobalt oxide coatings exhibit good thermal stability up to ∼815 and 630 °C, respectively, with minimal changes in their optical and structural properties and with thermal efficiency greater than 90%. The study offers valuable insights into the high-temperature annealing effects on the optical and structural properties of multiscale copper alloyed coatings fabricated by electrodeposition and presents a means of designing the optimal temperature range for maximizing absorber efficiency in practical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI