材料科学
奥氏体
冶金
马氏体
合金
体积分数
延展性(地球科学)
灰烬
板条
降水
微观结构
复合材料
相(物质)
相图
蠕动
化学
物理
有机化学
气象学
作者
Menglei Jiang,Hyun Seok Oh,Kyung‐Shik Kim,Cemal Cem Taşan
出处
期刊:Acta Materialia
[Elsevier BV]
日期:2023-12-30
卷期号:266: 119641-119641
被引量:23
标识
DOI:10.1016/j.actamat.2023.119641
摘要
Introducing reverted austenite at lath martensite boundaries has been shown to be an effective method to increase the ductility of martensitic steels. However, significant strength reductions can also be introduced during the reversion process in martensitic stainless steels. To overcome the strength-ductility trade-off, we explore the effects of alloying elements in delaying the overaging of the precipitates and accelerating the austenite formation. To this end, we carry multi-objective optimization considering (1) lattice misfit and diffusivity for kinetics of precipitation, and (2) austenite fraction and thermodynamic driving force of austenite reversion for austenite formation. With the insights from calculations, model alloy compositions are then proposed, and mechanical testing and microstructural analysis are applied. The model alloy confirms that a relatively higher volume fraction of austenite can form prior to overaging, which doubles the total elongation without significant strength loss.
科研通智能强力驱动
Strongly Powered by AbleSci AI