腐蚀
管道运输
湿气
直线(几何图形)
材料科学
冶金
石油工程
环境科学
工程类
环境工程
物理
热力学
数学
几何学
作者
Yunping Zheng,J. Sonke,W.M. Bos
出处
期刊:
[NACE International]
日期:2021-04-19
卷期号:: 1-14
被引量:8
摘要
Abstract Top-of-line corrosion (TLC) is known as one of the main corrosion threats in wet gas pipelines operating in stratified flow conditions. Using a corrosion model is one of the key tools to identify and quantify the threat and to identify the potential need for mitigation and control of this risk. This paper will describe a new TLC model that can be used to assess the TLC risk for sweet wet gas pipelines. This model is based on the mechanistic understanding from the latest literature and knowledge generated in a JIP (Joint Industry Project with Ohio University). The new model addresses the following relevant physicochemical phenomena: The latest electrochemical CO₂ corrosion model for the bare steel corrosion rate, including the effect of organic acids as a pH buffering agent.The Fe2+ flux balanceThe condensation rate, condensation regime and condensing droplet sizeFeCO3 formation and its effect on the corrosion rateIncomplete substrate coverage during low condensation rates Three sources or sinks in the Fe2+ flux balance equation are distinguished: Fe2+ formation by corrosionFe2+removal by FeCO3 precipitationFe2+ transportation by condensed water film convection This model has been implemented into our in-house corrosion prediction software Hydrocor (HC). The performance has been verified with a database compiled from the literature. The new TLC Model shows a very good agreement with both experimental and field data on top of line corrosion.
科研通智能强力驱动
Strongly Powered by AbleSci AI