材料科学
乙烯醇
纳米复合材料
石墨烯
硼酸
氧化物
复合材料
腐蚀
傅里叶变换红外光谱
化学工程
聚合物
高分子化学
有机化学
纳米技术
冶金
化学
工程类
作者
Xuyang Li,Parthasarathi Bandyopadhyay,Meng Guo,Nam Hoon Kim,Joong Hee Lee
出处
期刊:Carbon
[Elsevier BV]
日期:2018-03-16
卷期号:133: 150-161
被引量:60
标识
DOI:10.1016/j.carbon.2018.03.036
摘要
Abstract A new series of boric acid (BA) induced cross-linked poly(vinyl alcohol-co-ethylene) (EVOH)/graphene oxide (GO) nanocomposite (EVOH/BA/GO) films are prepared using different amount of GO and BA with respect to EVOH. The EVOH/BA/GO nanocomposites are respectively coated on nylon films and stainless steel substrates by a typical spray coating method, followed by thermal and hydrazine vapor treatment for gas barrier and corrosion studies. The Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses confirm the formation of cross-linked nanocomposite through the formation of B–O–C bond. The field emission scanning electron microscopy analysis indicates the formation of homogeneous structure for these nanocomposites. The storage modulus (at 25 °C) and elastic modulus of EVOH/15BA/5GO-coated film with 15% BA and 5% GO are enhanced by 280 and 60%, respectively, in comparison to nylon film. EVOH/15BA/5GO-coated nylon film exhibits dramatic reduction of hydrogen (6.9) and oxygen gas (1.5) transmission rates (cc/m2∙d∙atm) than pure nylon film. In addition, EVOH/15BA/5GO-coated stainless steel shows an ultralow corrosion current (0.294 μA/cm2) and corrosion rate (3.43 × 10−3 mm/year) than steel. A comparative study between EVOH/BA/GO and EVOH/GO is performed to examine the effect of the cross-linker on the different physical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI