焊接
球栅阵列
材料科学
回流焊
残余应力
接头(建筑物)
复合材料
压力(语言学)
有限元法
冶金
结构工程
工程类
语言学
哲学
作者
Sheng-jun Zhao,Chunyue Huang,Xiang-qiong Tang,Liangkun Lu
标识
DOI:10.1109/icept.2018.8480531
摘要
Based on the theory of thermal elasticity and plasticity and ANSYS software, the finite element model of residual stress after reflow soldering of lead-free peripheral array BGA solder joints was established. The reflow cooling process of Sn3.0Ag0.5Cu solder joints was simulated by using the berth and death technology. The residual stress distribution of the BGA solder joint was obtained by loading the temperature profile of the reflow cooling stage at different rates. The results show that the equivalent stress increases rapidly with the decrease of temperature during the initial stage of cooling and crystallization of solder joints. When the temperature of the solder joint gradually decreases to room temperature, the equivalent stress is the maximum; in the reflow process, the stress of BGA solder joints distribution is uneven, the maximum stress occurs at the outermost corner of the solder joint array; with the increase of the cooling rate, the residual stress increases.
科研通智能强力驱动
Strongly Powered by AbleSci AI