材料科学
热导率
传热
潜热
导电体
复合材料
热能储存
热传导
石墨
热的
相变材料
复合数
电子设备和系统的热管理
热撒布器
热接触
强化传热
散热片
铜
瞬态(计算机编程)
热阻
相变
热扩散率
多孔性
蓄热器
相(物质)
热桥
多孔介质
热接触电导
热障涂层
体积热容
强化传热
作者
Xingang Yu,Yingying Tian,Yong Li,Xiubing Huang
标识
DOI:10.1021/acsaem.6c02806
摘要
High-power electronic devices, due to heat accumulation, urgently require thermal management materials that combine rapid heat dissipation with transient thermal storage capabilities. Paraffin-based phase change materials (PCMs) are promising candidates owing to their high latent heat, but their intrinsically low thermal conductivity and leakage issues during solid–liquid phase transition severely limit practical applications. Herein, a copper mesh/expanded graphite (EG) dual heat-transfer network strategy is developed for highly thermally conductive composite PCMs. The Cu mesh provides continuous conductive pathways, while the EG sheets facilitate heat transport within the EG/paraffin wax (PW) regions. The porous structure of EG also supports PW. In laminated EG/PW-CuX composites, the optimized EG/PW-Cu16 achieves a high in-plane thermal conductivity of 51.33 W·m–1·K–1 and a latent heat of 134.46 J·g–1, enabling efficient localized hot-spot spreading and planar temperature homogenization. To further meet the through-plane heat-flow requirement of chip-to-heat-sink thermal management, the spatial organization of the same Cu mesh/EG dual-network system is adjusted to construct PCC-X composites. The optimized PCC-40 exhibits a through-plane thermal conductivity of 24.71 W·m–1·K–1 while retaining a latent heat of 153.94 J·g–1. Simulated chip thermal management tests demonstrate that PCC-40 reduces the equilibrium heater temperature from 98.10 to 81.12 °C at 20 W compared with a commercial thermal pad. This hierarchical Cu-mesh/EG dual network provides an effective strategy for balancing directional heat transfer and latent-heat storage in CPCMs for electronic thermal management.
科研通智能强力驱动
Strongly Powered by AbleSci AI