Application of Mixed Shell Powder as Modifier and Filler in Asphalt Mixture

The rapid development of tropical island tourism has put forward a higher demand for asphalt pavement construction on the island. However, the asphalt pavement engineering in the offshore area is generally faced with high material transportation costs. Additionally, challenges such as high-temperature climate and heavy-load traffic may lead to permanent pavement deformation. As a typical marine solid waste, shells have high calcium carbonate content and porous structures, which have the potential advantage of modified asphalt. In this study, mixed shell powder was used as a modified material, and 70 # base asphalt and SBS-modified asphalt were mixed, respectively. The effect of asphalt modification was analyzed by basic performance tests and high-temperature rheological tests. An asphalt mixture was prepared by replacing limestone powder with mixed shell powder in equal volume, and its road performance was systematically tested. The modification mechanism was revealed by means of a microscopic test. The results show that the recommended content of mixed shell powder in SBS-modified asphalt is 9%, and 50-100% mixed shell powder can be used to replace mineral filler in base asphalt and single SBS modified asphalt mixture. This study provides effective technical support for the utilization of shell solid waste in offshore areas and the optimization of asphalt pavement performance.