摩擦电效应
纳米发生器
材料科学
能量收集
电压
旋转(数学)
机械能
功率密度
静电感应
电极
扭矩
最大功率原理
光电子学
功率(物理)
转速
微执行器
能量转换
离心力
电气工程
悬臂梁
弹簧(装置)
磁铁
振动器(电子)
能量(信号处理)
电势能
磁滞
空间电荷
接触带电
电流(流体)
交流电
异质结
脉冲功率
发电
微加工
声学
反冲
电流密度
脉冲宽度调制
作者
Shitong Fang,Yi Guan,Jiabao Zou,Miao Chen,Liangdong Wei,Liuchao Jin,Zhihui Lai,Biao Wang,Mingjing Cai,Wei‐Hsin Liao
摘要
Self-powered monitoring of slowly rotating components is hindered by the small relative speed and limited installation space available to conventional rotary triboelectric nanogenerators (TENGs). Here, a continuously driven unidirectional rotary TENG (CDUR-TENG) is developed by integrating a multilayer spiral-spring electrode with a ratchet-triggered energy-storage/release mechanism. During winding, the spring stores elastic energy while its adjacent triboelectric interfaces progressively separate; ratchet disengagement then initiates rapid elastic recoil and concentrated charge transfer. The device therefore decouples the electrical pulse from the slow external rotation. At 0.2 Hz, the CDUR-TENG provides a peak-to-peak open-circuit voltage of approximately 130 V and a maximum short-circuit current of 55 μA; it transfers 0.165 μC per cycle and reaches a maximum instantaneous power of 2.182 mW at 1 Hz and 1.1 MΩ. The resulting normalized power density reaches 191.4 W m−3Hz−1, at least 8.57 times that of the compared rotary harvesters. Voltage signatures further distinguish operating angle, angular overshoot, and reverse rotation, demonstrating a compact route toward self-powered condition monitoring under ultra-low-frequency rotation.
科研通智能强力驱动
Strongly Powered by AbleSci AI