材料科学
碲化铋
热电效应
退火(玻璃)
微观结构
变形机理
合金
变形(气象学)
纳米晶材料
热电材料
晶界
复合材料
纳米技术
热力学
热导率
物理
作者
Haixu Qin,Wanbo Qu,Yang Zhang,Yongsheng Zhang,Zihang Liu,Qian Zhang,Haijun Wu,Wei Hua Cai,Jiehe Sui
出处
期刊:Advanced Science
[Wiley]
日期:2022-03-18
卷期号:9 (14): e2200432-e2200432
被引量:72
标识
DOI:10.1002/advs.202200432
摘要
Abstract Bi 2 Te 3 based thermoelectric alloys have been commercialized in solid‐state refrigeration, but the poor mechanical properties restrict their further application. Nanotwins have been theoretically proven to effectively strengthen these alloys and could be sometimes constructed by strong deformation during synthesis. However, the obscure underlying formation mechanism restricts the feasibility of twin boundary engineering on Bi 2 Te 3 based materials. Herein, thorough microstructure characterizations are employed on a series of Bi 0.4 Sb 1.6 Te 3+ δ alloys to systematically investigate the twins’ formation mechanism. The results show that the twins belong to the annealing type formed in the sintering process, which is sensitive to Te deficiency, rather than the deformation one. The Te deficiency combined with mechanical deformation is prerequisite for constructing dense nanotwins. By reducing the δ below −0.01 and undergoing strong deformation, samples with a high density of nanotwins are obtained and exhibit an ultrahigh compressive strength over 250 MPa, nearly twice as strong as the previous record reported in hierarchical nanostructured (Bi, Sb) 2 Te 3 alloy. Moreover, benefitting from the suppressed intrinsic excitation, the average zT value of this robust material could reach near 1.1 within 30–250 °C. This work opens a new pathway to design high‐performance and mechanically stable Bi 2 Te 3 based alloys for miniature device development.
科研通智能强力驱动
Strongly Powered by AbleSci AI