矫顽力
锰
合金
材料科学
电镀(地质)
电镀
扫描电子显微镜
分析化学(期刊)
磁化
硼酸
冶金
涂层
饱和(图论)
化学
复合材料
磁场
色谱法
物理
地质学
有机化学
组合数学
量子力学
数学
凝聚态物理
图层(电子)
地球物理学
作者
Sen-Lin* WANG,Liang-Liang Hong,Man-Yu TU
出处
期刊:Chinese Journal of Applied Chemistry
[Science China Press]
日期:2009-09-01
卷期号:26 (09): 1060-1064
标识
DOI:10.3724/j.issn.1000-0518.2009.09.10601064
摘要
The Co-Mn alloys were electro-plated from the acid sulfate salt plating solution containing sodium citrate as complexing agent and boric acid as a buffer agent. The cyclic voltammetric experiments showed that the initiative co-deposition potential of the alloy is about -1.282 V (vs. Hg-Hg2SO4 , sat.K2SO4). The effect of the plating conditions on the structure and the magnetic performances of the Co-Mn coating were studied by scanning electron microscope (SEM), energy dispersive X-ray spectrum (EDS), X-ray diffractometry (XRD) and vibrating sample magnetometer (VSM), respectively. As a result, the influence of the plating conditions on the coating’s composition is relatively remarkable. With the increase of the cathodic current density from 10 to 40 mA•cm-2 at the plating bath pH 4.0, the manganese content of the coating increases from 0.3 at% to 6.6 at%, and The coating structure is transform from hcp Co-Mn solid solution into fcc Co-Mn solid solution. With the increase of the manganese content of the film, the saturation magnetization increases, then, it decreases. The maximal saturation magnetization reaches 19262.0 kA•m-1. The value of the film coercive force ranges from 31.6 kA•m-1 to 33.9 kA•m-1.
科研通智能强力驱动
Strongly Powered by AbleSci AI