锰
膜
化学
溶剂
锂(药物)
基质(化学分析)
无机化学
氢
氧化锰
混合氧化物
氧化物
有机化学
医学
色谱法
生物化学
内科学
作者
H.M. Saif,Amanuel Gidey Gebretatios,Rosa M. Huertas,João G. Crespo,Sylwin Pawlowski
标识
DOI:10.1016/j.gce.2025.03.005
摘要
The rising lithium-ion battery market drives lithium demand and requires efficient and selective lithium recovery methods from aqueous sources. Membrane technologies can address environmental and inherent efficiency issues in conventional lithium extraction methods. This study presents the synthesis of novel lithium-selective mixed matrix membranes (MMMs) by integrating 0–30 wt% of a lithium selective filler named hydrogen manganese oxide (HMO) into a sulfonated polyethersulfone (SPES)-Nafion polymer matrix. The membranes were produced by casting and thoroughly examined to assess their chemical, physical, morphological, thermal, and mechanical characteristics. The transport of lithium across membranes was evaluated in diffusion and electro-diffusion studies. The membrane containing 20 wt% of HMO exhibited the highest ideal selectivity values, which were 1.05 for Li + /K + , 1.20 for Li + /Na + , and 13.36 for Li + /Mg 2+ ; and more than 97% increase in lithium-ion conductivity when compared with the control membrane without HMO. In diffusion experiments, the binary separation factors for Li + /K + , Li + /Na + , and Li + /Mg 2+ were 0.71, 1.52, and 11.83, respectively, while under electro-diffusion conditions, the corresponding values were 0.82, 1.55, and 9.88. Above 20 wt% of HMO, membranes lose their separation capacity as HMO aggregates inside the membrane structure. The higher selectivity of membranes towards Li + in the presence of Mg 2+ is due to magnesium's larger hydrated radius and higher hydration energy compared to lithium. Overall, the prepared membranes demonstrated a promising potential for green lithium recovery. This study facilitates the advancement of sustainable lithium-selective MMM synthesis. • Mixed matrix lithium selective membranes were synthesized. • The optimal loading of Li-selective filler (HMO) in the polymer matrix was 20 wt%. • Adding Li-selective filler increased membrane lithium conductivity by 97%. • The best membrane showed ideal selectivity for Li + /Mg 2+ = 13.36 and Li + /Na + = 1.20.
科研通智能强力驱动
Strongly Powered by AbleSci AI