Scalable drop-casting construction of light-addressable photoelectrochemical biosensor on laser-induced graphene electrode arrays for high-throughput drug screening

A drop-casting method for the scalable construction of a solar cell-type light-addressable photoelectrochemical (PEC) sensor on commercial phenol resin (PR) plates is reported. The sensor was fabricated by laser writing of addressable laser-induced graphene (LIG) electrode arrays on PR plates with ring-disc dual-electrode cell configurations using a 405 nm laser machine. Beneficial from the good hydrophilicity of PR-based LIG and the excellent film formation of bismuth sulfide nanorods (Bi2S3 NRs), uniform Bi2S3 photovoltaic films can be reproducibly deposited onto the LIG disc photoanode array via drop casting modification, which show a sensitive photocurrent response toward thiocholine (TCl) when the ring cathode array was coated with Ag/AgCl. An acetylcholinesterase (AChE)-based PEC biosensor was therefore constructed by a similar drop-casting modification method. The resulting biosensor exhibits good sensitivity toward an AChE inhibitor, i.e., galantamine hydrobromide (GH), with a calibration range of 10–300 μM and a detection limit of 7.33 μM (S/N = 3). Moreover, the biosensor possesses good storage stability, which can achieve the high-throughput screening of AChE inhibitor drugs from traditional Chinese medicines (TCMs). The present work thus demonstrates the promising application of LIG technology in constructing light-addressable PEC sensing devices with high performance and low cost.