Process Development of Aluminum Electroplating from an Ionic Liquid on 150 mm Wafer Level

This paper focuses on the development of electroplating on 150 mm wafer level for microsystem technology applications from 1-Ethyl-3-methylimidazolium chloride (EMImCl) with Aluminumtrichloride (AlCl3). The deposition was carried out on 150 mm wafers with Au or Al seed layers deposited by physical vapor deposition (PVD). The electrodeposition was carried out using pattern plating. On the Au seed layer, bipolar pulse plating was applied. Compared to the Au seed layer, the electrodeposition on the Al seed layer was favorable, with lower current densities and pulsing frequencies. Utilizing the recurrent galvanic pulses and avoiding ionic liquid convection, inhomogeneities lower than 15% were achieved with a laboratory plating cell. One major aspect of this study was the removal of the native Al oxide prior to deposition. It was investigated on the chip and wafer levels using either current- or potential-controlled removal pulses. This process step was affected by the plasma treatment of the wafer, thus the surface free energy, prior to plating. It turned out that a higher surface free energy hindered proper oxide removal at a potential of 3 V. The theory of oxide breakdown based on electrostriction force via the electrical field was applied to discuss the findings and to derive conclusions for future plating experiments.