Stereologically corrected particle size distributions for polymer-mounted additive manufacturing powders

Well-defined particle size distributions are required for good flowability and powder packing properties of additive manufacturing powders. Mounting powders within a polymer and using standard metallurgical preparation techniques to cross-section and prepare powder particles for optical analysis allows for simple characterisation processes. However, measured diameters of cross-sectioned particles are typically underestimates of actual particle diameters and hence require stereological correction. The effectiveness of three stereological corrections are investigated in this work, namely the Scheil-Schwartz-Saltykov method, the Goldsmith-Cruz-Orive method and a Finite Difference Method. These methods are investigated against plasma-atomised, gas-atomised and ultrasonically processed Ti-6Al-4 V powders. The corrected outputs are compared to laser size diffraction, benchmark data for each powder. Although all three stereological corrections produce improved estimations of the particle size distributions, the Finite Difference Method is recommended producing cumulative mean absolute error values of 2.4%, 3.1% and 7.5% for the plasma-atomised, gas-atomised and ultrasonically processed powders respectively.